How Do I Install Toto Washlet?

If you’re wondering how to install a Toto Washlet, the process is actually quite simple. The first thing you’ll need to do is gather the necessary materials, which include a Toto Washlet unit, a power cord, and a water supply line. Once you have all of these things, you’ll need to find a spot for the Washlet unit that is close to a water source and an electrical outlet.

Once you have the unit in place, you can begin the process of installing the power cord and water supply line. The process is relatively straightforward and should only take a few minutes to complete.

If you’re looking to install a Toto Washlet, you’ve come to the right place. In this blog post, we’ll walk you through everything you need to know to get your Washlet up and running. First, you’ll need to gather the following materials: a Toto Washlet, a power drill, a screwdriver, and some screws.

Once you have all of that, you’re ready to get started. The first step is to find the studs in your wall. You’ll need to drill some pilot holes into these studs so that you can screw the Washlet into place.

Once you’ve found the studs, drill the pilot holes and then screw the Washlet into place. Next, you’ll need to connect the water supply line to the Washlet. You can do this by using the screws that come with the Washlet.

Once the water supply line is connected, turn on the water and let it run for a few minutes to flush out the line. Finally, you’ll need to connect the power supply to the Washlet. Once that’s done, you’re all set!

Your Toto Washlet is now installed and ready to use.

How to install the TOTO S550e Washlet Bidet Seat

Can Toto Washlet be installed on any toilet?

If you’re considering a Toto Washlet, you’re probably wondering if it can be installed on any toilet. The answer is yes, but there are a few things to keep in mind. First, the Washlet must be compatible with your toilet.

Toto offers a variety of Washlets, each designed for specific types of toilets. If you have a standard toilet, the Round Washlet is a good option. If you have a one-piece toilet, the Elongated Washlet might be a better choice.

Second, you’ll need to make sure your toilet is properly vented. The Washlet requires a GFCI-protected circuit and a 120-volt AC power outlet. If your toilet isn’t properly vented, you’ll need to have an electrician install a vent before you can install the Washlet.

Third, you’ll need to have a professional plumber install the Washlet. Toto does not recommend that consumers attempt to install the Washlet themselves. If you’re considering a Toto Washlet, rest assured that it can be installed on most toilets.

Just keep in mind that you’ll need to make sure your toilet is compatible and properly vented, and that you’ll need to have a professional plumber do the installation.

Where do I put the Toto Washlet outlet?

There are a few things to consider when deciding where to place the outlet for your Toto Washlet. The first is the distance from the toilet. The outlet should be within 4 feet of the toilet, so that the cord can reach.

The second is the height of the outlet. The outlet should be placed at least 12 inches above the floor, so that the Washlet can be easily plugged in. Lastly, the outlet should be placed in a location that is convenient for you to reach.

Does Toto Washlet need to be plugged in?

No, the Toto Washlet does not need to be plugged in. It gets its power from the water supply line.

How much does it cost to install Toto Washlet?

When it comes to high-end toilet options, Toto is a name that always comes up. Toto toilets are known for their quality, and their Washlet feature is a big part of that. So, how much does it cost to install a Toto Washlet?

The cost of a Toto Washlet will vary depending on the model you choose and the installer you use. Generally speaking, you can expect to pay between $1000 and $2000 for a Toto Washlet, including installation. If you’re looking to get the most bang for your buck, we recommend choosing a mid-range model like the Toto Connect or the Toto Supreme.

Both of these models offer great features at a reasonable price point. No matter which model you choose, you can rest assured that you’re getting a quality product that will enhance your bathroom experience. So, if you’re looking for a top-of-the-line toilet option, be sure to consider a Toto Washlet!

How do I install Toto Washlet?


Uninstall toto washlet

If you’re planning on uninstalling your Toto Washlet, there are a few things you’ll need to do first. Before you begin, make sure you have all the tools and materials you’ll need: – A Phillips head screwdriver

– A putty knife – A new seat (if you’re planning on replacing your Washlet with a new one) – A towel (to catch any water that may drip from the hoses)

First, remove the lid of your toilet seat and set it aside. Then, use the Phillips head screwdriver to remove the two screws that hold the Washlet in place. Next, use the putty knife to pry the Washlet off of the toilet seat.

Once the Washlet is removed, you’ll need to disconnect the water supply hose and the power cord. To do this, simply unscrew the hose from the back of the Washlet and unplug the power cord from the outlet. Now that the Washlet is disconnected, you can lift it off of the toilet and set it aside.

If you’re planning on replacing it with a new one, you can now install the new seat. Otherwise, you can simply put the lid back on the toilet and screw it in place. If you have any questions about uninstalling your Toto Washlet, feel free to leave a comment below!

Toto washlet installation electrical requirements

If you’re considering installing a Toto Washlet in your bathroom, you’ll need to make sure your home’s electrical system can handle the additional load. The Washlet requires a dedicated circuit with a 20-amp breaker. The circuit should be 14-gauge wire, and the breaker should be labeled “Washlet” or something similar.

In addition to the dedicated circuit, you’ll need to make sure your home’s water pressure is sufficient. The Washlet needs a water pressure of at least 0.5 bar (500 kPa). If your home’s water pressure is lower than that, you’ll need to install a water pressure booster.

Finally, you’ll need to make sure your bathroom has enough space to accommodate the Washlet. The unit itself is about 18 inches wide, 14 inches deep, and 3 inches tall. But you’ll also need to make sure there’s enough space around the unit for the water supply lines and the electrical connection.

Installing a Toto Washlet in your bathroom can be a great way to add a little luxury to your life. But before you start the installation, make sure your home’s electrical and plumbing systems are up to the task.

Toto washlet+ plus

If you’re looking for a luxurious and high-tech toilet experience, the Toto Washlet+ Plus is the perfect option. This toilet features a built-in bidet with a host of features that will leave you feeling refreshed and clean. The Washlet+ Plus also features a heated seat, a deodorizing system, and a remote control for easy operation.

The Toto Washlet+ Plus is the perfect toilet for those who want the ultimate in cleanliness and luxury. With its built-in bidet and array of features, the Washlet+ Plus will leave you feeling refreshed and clean. The heated seat and deodorizing system make this toilet a must-have for any home.


If you’re looking to add a Toto Washlet to your bathroom, follow these simple steps! First, remove your toilet seat and unscrew the bolts that hold it in place. Next, using the included template, mark the four holes where you’ll be attaching the Washlet.

With a drill, create pilot holes in the marked locations, then attach the Washlet using the included hardware. Finally, screw your toilet seat back in place. That’s it – you’re now ready to enjoy the benefits of a Toto Washlet!

Leave a Reply